Insulating Mat

FOR ELECTRICAL PURPOSE :

( IS : 15652/2006)

GENERAL PURPOSE RUBBER HOLOMAT


Universal Pattern
Square / Taper Edge
Available Sizes :

Length Width Thickness
1550 1050 22 mm
1500 1000 22 mm
1230 830 22 mm
1200 800 22 mm
1000 750 22 mm
1000 500 22 mm
800 600 22 mm
Length Width Thickness
600 400 22 mm
1210 810 16 mm
1200 800 16 mm
800 600 16 mm
800 400 16 mm
600 400 16 mm

Application : Human safty is prime concern of the mat developed for electrical purpose and shall be used as floor convering for the protection of workers AC & DC installations with the system voltages upto 66 KV as & 240V dc

Construction : Insulating Mat made from highly electrical resistant elastomer resistant elastomer, free from any insertions

Surface : Upper surface of the mat is having small anti-skid aberration marks (rough surface without edges) to avoid slippery effects and lower surface is plane.

Dimension : Length and Width : Standard sizes are 1Mtr.×2Mtr. and 1.2Mtr.×2.4Mtr.

Thickness : Thickness as per classification & designation

Class of Mat Thickness (mm) Tolerance (%) Ac (rms) kV Dc (rms) V
A 2.00 ±10 3.3 240
B 2.50 ±10 11 240
C 3.00 ±10 33 240
D 3.50 ±10 66 240

Electrical Properties & Voltage test :

Class of Mat Thickness (mm) Di-electric Strength ac (rms) kV Proff Voltage ac (rms) kV
A 2.00 30 10
B 2.50 45 22
C 3.00 65 36
D 3.50 110 70

Working Temp. Mats :
 -10 to 55°C

Silent Features of the Mats :

  • Flame Retation
  • Low Temperature Resistant
  • Acid / Alkalis & Oil Resistant
  • Insulation Resistant with water
  • Low Leakage Current

Areas of application / use :

  • All kind of electric Sub-stations
  • Transformers Rooms
  • Lift Machine Rooms
  • Switch Rooms
  • Electric Panels
  • AC Plant Rooms
  • X-RAy Plant Rooms
  • LT / HT Labs
  • Around Bus Bars
  • Generator Rooms, etc

Recommendation for Use of Mats :

  • For obtaining max. practical safety in adverse working conditions, the mat should be permanently pasted with the
    hepl of suitable adhesive / resin.
  • All joints and covers shall be filled / covered with insulating materials of matching colors.
  • Joints waterproofing compound should be used to protect insulating & electrical properties from moisture.
  • Contact with petrol / diesel / paraffin or white spirit and strong acid / alkalis should be avoided.